Home Improvement

Advantages of Standing Seam Cladding

There are a wide variety of options to consider while deciding on which material to purchase to install a new roof for your home. Even after narrowing your choices, you’ll still need to choose between a Standing Seam Cladding metal roof and a corrugated metal roof (along with the many options within each).

The first step in installing a metal roof is picking out the right metal roofing panel. Standing Seam Cladding is widely used on commercial and residential buildings because of its reputation for durability and reliability. The vertical legs of a standing seam metal roof support a large, flat area in the middle and the fasteners. It is also characterized by vertical legs or raised seams that project beyond the panel’s flat center. Standing seam systems include hidden mechanically locking pins, either a flange that attaches the meeting directly to the deck under the vertical leg or a clip that joins the board to the roof deck.

There are so many benefits of this material due to the high-end technicality of installing the panels

1. There Are No Additional Clasps or Zippers:

Perhaps, the most significant benefit of using standing seam cladding metal roof panels is that the fasteners used in this type of metal panels are covered to prevent premature failure due to weathering, corrosion, or other environmental causes. In addition, standing seam services eliminate the possibility of damage to the panels that provide cover for your building since the best roofing companies know that water leaks, air leaks (both hot and cold), and decreased energy efficiency may all come from damaged panels. Some people also find the heads of fasteners to be unsightly, which is why the standing seam method of concealment is so standard.

2. Allows For The Flow of Heat:

Suppose a metal panel can’t expand and compress as needed due to thermal expansion and contraction. In that case, it may have problems such as oil canning, fastener withdrawal, increased noise, and others. Most varieties of Standing Seam Cladding metal roofs do not double pin their panels, facilitating thermal movement. It is especially the case if the system employs a snap-lock or slider/expansion clip, letting the metal move freely inside the clip.

3. Life Span & Durability:

Standing Seam Cladding metal roofing panels are far more durable and need low maintenance than other materials, like asphalt shingles or concrete tiles. Since fasteners are not require to penetrate standing seam panel, inspecting for loose, damaged, or retracted fasteners during routine maintenance is not typical. Standing seam metal roof systems often provide a PVDF paint technique that will extend the life of your roof and improve its visual appeal.

4. Greater Quantity of Waterproof Standing Seam Roof Panels:

The first step in determining which metal roof panel system is best for your home is to familiarize yourself with the differences between the two – a concealed fastening or an open one while shopping for a metal roof. Standing seam panels are a kind of metal roofing panel that has fasteners embedded in the seam itself. This roofing system offers the best protection against the elements.

Standing Seam Cladding

5. Standing Seam Metal Roofing Panels Are Low Maintenance:

Expansion and contraction do not affect a Standing Seam Cladding roof. Because the fasteners are safe from the weather, the screws do not have replaceable washers. Therefore, you won’t have to bother getting up on your roof regularly to check the fasteners to ensure they haven’t loosened and tightened again. Due mainly to its hidden fasteners, standing seam metal roofing panels have a much longer lifespan before requiring significant maintenance.

6. Built And Tested to Perform Very Well:

The need for engineered materials is growing, especially for hurricane and high-wind areas where we must fortify businesses. Most designed for commercial or residential use must pass wind uplift, air leakage, water penetration, combustion/fire resistance, and impact resistance testing before being approved for installation.


Standing Seam Cladding metal roofing is available in a wide range of standard PVDF paint system colors. PVDF is currently the best commercially available paint method for metal roofing panels. If you choose to install this roofing you are about to invest in the most delicate and expensive metal roofing system However, the best thing is in this case, the lifetime of a standing seam roof is 50 years or more. It must complement the roofing panels’ performance with a paint scheme. Using PVDF paint may reduce the rate of colors fade. You can achieve all those brilliant colors by using PVDF paint, which is why you often see it.

Leave a Reply

Your email address will not be published.